FLEX-3000/1500 RJ-45 Mic to W2IHY Audio Interface Configuration
Content provided by: FlexRadio Systems Engineering
The following wiring diagram represents how to wire the modular FLEX-3000 & FLEX-1500 RJ-45 8-pin microphone connector to the W2IHY EQplus and the 8-Band EQ using the 5-pin DIN connector.
![]()
NOTE: Connect the GROUND (GND) to the cable shield but do not connect it to the shield of the DIN connector
![]()
This KB article may reference additional files that are available on the FlexRadio Systems web site Downloads page. Please use the URL(s) below to download the referenced materials.
An Adobe Acrobat Reader may be required to open the file.You can download Adobe Acrobat from here.![]()
KB Source Document(s):
None Referenced
![]()
| System Dependencies | |
| Minimum PowerSDR Version: | N/A |
| Applicable Hardware: | FLEX-3000 & FLEX-1500 |
Content provided by: FlexRadio Systems Engineering
The following wiring diagram represents how to wire the modular FLEX-3000 & FLEX-1500 RJ-45 8-pin microphone connector to the W2IHY EQplus and the 8-Band EQ using the 5-pin DIN connector.
NOTE: Connect the GROUND (GND) to the cable shield but do not connect it to the shield of the DIN connector
| FLEX-3000/1500 Microphone Pinout Configuration | |
| Pin Number | Function |
| 1 | Not Used - Reserved for future use |
| 2 | Not Used - Reserved for future use |
| 3 | Vcc (+5 VDC) |
| 4 | Microphone Ground (mic -) |
| 5 | Microphone In (mic +) |
| 6 | PTT (PTT +) |
| 7 | PTT Ground (PTT -) |
| 8 | Not Used - Reserved for future use |
This KB article may reference additional files that are available on the FlexRadio Systems web site Downloads page. Please use the URL(s) below to download the referenced materials.
An Adobe Acrobat Reader may be required to open the file.You can download Adobe Acrobat from here.
KB Source Document(s):
None Referenced
