FLEX-1500 DC Power Interface
![]()
Content provided by: FlexRadio Systems Engineering
The FLEX-1500 utilizes a coaxial type power jack. The center pin measures 2.5 mm and the outer diameter is 5.5 mm. The center pin is positive (+) and the outer jacket is negative (-)
It uses a coaxial power connector like the one shown to the right.
A power cable, terminated with the proper connector, is supplied with the FLEX-1500, but if you would like to make additional power cables, the appropriate connectors can be purchased from the following companies listed below
| System Dependencies | |
| Minimum PowerSDR Version: | N/A |
| Applicable Hardware: | FLEX-1500 |
Content provided by: FlexRadio Systems Engineering The FLEX-1500 utilizes a coaxial type power jack. The center pin measures 2.5 mm and the outer diameter is 5.5 mm. The center pin is positive (+) and the outer jacket is negative (-)
It uses a coaxial power connector like the one shown to the right.
A power cable, terminated with the proper connector, is supplied with the FLEX-1500, but if you would like to make additional power cables, the appropriate connectors can be purchased from the following companies listed below
- Switchcraft # 760
- Mouser part number 502-760
This KB article may reference additional files that are available on the FlexRadio Systems web site Downloads page. Please use the URL(s) below to download the referenced materials.
An Adobe Acrobat Reader may be required to open the file. You can download Adobe Acrobat from here. 
KB Source Document(s):
None Referenced 